fix#2254: if the DB was closed without calling stop_io() and then an interrupt arrives (e.g. incoming message), the db was corrupted.
* Add result.log() for logging with less boilerplate code
* Bugfix: Resultify housekeeping() to make it abort if the db is closed instead of just deleting everything
* Require the UI to call dc_stop_io() before backup export
* Prepare a bit better for closed-db: Resultify get_uidvalidity and get_uid_next and let job::load_next() wait until the db is open
About the bug (before this PR):
if the DB was closed without calling stop_io() and then an interrupt arrives (e.g. incoming message):
- I don't know if it downloads the message, but of course at some point the process of receiving the message will fail
- In my test, DC is just in the process of moving a message when the imex starts, but then can't delete the job or update the msg server_uid
- Then, when job::load_next() is called, no job can be loaded. That's why it calls `load_housekeeping_job()`. As `load_housekeeping_job()` can't load the time of the last housekeeping, it assumes we never ran housekeeping and returns a new Housekeeping job, which is immediately executed.
- housekeeping can't find any blobs referenced in the db and therefore deletes almost all blobs.
It is misleading and should never be checked.
dc_stop_io() also stops pending ephemeral message deletion tasks, so it
should be called in any case before releasing context.
Start implementing #1994
TODO (in later PRs):
- Add a hint to the watch settings that all folders are fetched from time to time (to be done in the individual UIs)
- folder names are case-insensitive, so double-check that all comparisons are case-insensitive
- The `scan_folders.rs` file didn't get as large as I expected and it's probably not worth it having an extra file for it. But if there are no objections, I'll make another PR to rename it to `folders.rs` and also put into it `configure_folders()` from `imap/mod.rs` and `needs_move()` with all its tests from `message.rs`.
Done:
- Most mailboxes have a "Drafts" folder where constantly new emails appear but we don't actually want to show them, what do we do about this? The most reliable way to detect such messages that we found up to now is:
If there is no `Received` header AND it's not in the `ConfiguredSentbox`, then ignore the email.
- before or after INBOX idle trigger a new "scan all folders for messages". It does a "list folders" and then goes through all folders with select-statements, checking if "next-uid" was changed since checked last time. This might be batchable but in any case should not consume a lot of traffic. We might debounce this scan activity to happen at most every N minutes
- if next-uid changed for a folder, we "prefetch" and "fetch" DC-messages as as needed ("dc-messages" are not just those with "Chat-Version" headers, but can also be regular emails)
- if we discover DC-messages in folders that have the "/Spam" flag (maybe excluding ContactRequests) we automatically move them to INBOX/DeltaChat folder to help provider-spam-systems to regard this contact/mail as non-spam
- for now, we do not change any user visible option, but introduce this "scan all" automatically and on top of what exists. The DeltaChat folder-watching does not perform scan-all-folders (maybe with the exception to trigger scan-all also with DeltaChat if INBOX is not watched)
- Tests (except if you have ideas to improve them)
- all folders, their last uidvalidity, next-seen etc. are kept in a separate "imap-sync" sqlite table. Maybe this can be used to streamline some of the "Sent" folder and "DeltaChat" folder detection code we already have.
- We now also move self-sent messages from the Inbox to the Sent folder if `mvbox_move` is off, as this was very easy to do now. This way, we now behave more like a normal MUA if the user wants this.
FOR LATER PRs:
- maybe for the first 50 messages or so, we could reduce the IDLE-timeout (currently 23 minutes or so) to faster detect messages sent to non-inbox folders. However, on Android and iOS, we would likely trigger scan-all when the app moves to foreground, and so it might not be neccessary to reduce the current idle-timeout at least for them. We can leave this "faster discovery" question for the end, after we move to real-life testing.
- (Later on, after the above works, we can consider heuristics on which folders to perform IDLE on, and remove the Watch-folder options (inbox, deltachat, sent). We tried to find a safe scheme for already doing it but failed to fine one, too many unknowns, also some questions regarding multi-device (you might have different settings with each of it, one moves, the other doesn't etc.) so we postponed this in favor of the above incremental suggestion.)
* Start implementing #1994
* Add debug logs, it seems like the SQL migration can go into another pr
* Let fetch_new_messages return whether there are new emails
* Code style
* Don't prefetch if there are no new emails
* clippy
* Even more debug logs
* If the folder was not newly selected, return always try to fetch as
uid_next is probably outdated
* Fix new bug
* Recognize spam folder
* if we discover DC-messages in folders that have the "/Spam" flag (excluding ContactRequests) we automatically move them to INBOX/DeltaChat folder to help provider-spam-systems to regard this contact/mail as non-spam
* Clippy, prioritize folder_meaning over folder_name_meaning
* Add a first test, for the first day after installation only debounce to 2s
* Start adding two tests (both of them fail)
* Don't abort folder scan if one folder fails
* More consts
* Replace bool return value by enum
* Split test up into multiple tests
* Print logs during rust tests
* Rust tests pass now
* .
* One of the Python tests passes now - reconfigure folders during scanning
* Make the last test pass - Delete emails in all folders when starting the test, not only inbox and mvbox
The problem had been that emails were left in the folder "xyz"
* lint
* DB migration (untested)
* Store uid_next in SQL instead of lastseen in a config
* Revert "If Inbox-watch is disabled and enabled again, do not fetch emails from in between"
all folders are always watched, anyway
* clippy, rm debug logs, comments
* Codestyle, comments
* fixing things again
* Fix another test: don't fetch from uid_next-1 but uid_next; make some {} to {:#} so that we can use `.context(...)`
* move self-sent, non-setupmessage chat messages to the Sent folder if `mvbox_move` is off
* comment
* Comments, make sure things work even if there is no uid_next
* Style
* Comments
* The rust test tested wrongly
* comments, small codestyle change
* Ignore emails that are probably only drafts
Most mailboxes have a "Drafts" folder where constantly new emails appear
but we don't actually want to show them.
So: If there is no Received header AND it's not in the ConfiguredSentbox,
then ignore the email.
Also: Add test.
* Fix occasional test failure, it was introduced as DC now moves messages from Inbox to Sent
* Add `Received` header to the rust tests
* After this PR we will always watch all folders and delete messages there if server_delete is enabled. So, for people who have server_delete on, disable it and add a hint to the devicechat
* comment, small fix
* link2xt's first review
* Use ON CONFLICT(FOLDER) DO to update and if it doesn't exist, then insert
Reason from link2xt: We had a problem with multiple peerstates inserted due to key fingerprint parsing error previously. With logic in Rust a similar problem can occur: an UPDATE can fail for reasons other than a conflict. PRIMARY KEY should ensure uniqueness in this case, but anyway.
* Remove two TODO statements, remove fetch_new_messages: ignoring uid {}, uid_next was {} log
* Next TODO: Make uidvalidity and uid_next DEFAULT 0
* rm two TODOs, Seems like we are not going to `exclude folders that are watched anyway` in this PR
* small tweak: Handle instants more carefully
* Add scan_all_folders_debounce_secs config for tests, set debounce to 60s (before it was just 2s during the first day)
* Don't use bold letters for the device message
* React to changes in the folders better
Before, if there was a configured Sent folder, but then it got
removed and replaced with another folder with a name meaning "Sent" but
without Sent flag, it would be ignored.
So, instead of checking against ConfiguredSentboxFolder,
create two Option variables at the beginning of the loop and replace
them with Some if it is None. At the end of the loop, store the new
values into ConfiguredSendboxFolder and ConfiguredSpamFolder, even if it
is None.
Also, derive some useful traits.
* move job: Return a meaningful error if server_folder is None instead of panicing
* small error-handling fix
* Fix test_fetch_existing() python test
Before, we sometimes got a race condition where scan_folders() sees that
there is a Sentbox and saves this info after we set the
ConfiguredSentbox to None and before the message is sent.
So, just expect that the message is moved to the sentbox.
* migration is 72 now
* rm 2 TODOs, Don't infinitely retry when dc_receive_imf() returns Err
* clippy: Remove glob imports
* Delete created folders at the beginning of tests
(some created folders made problems in the next tests because)
* Improve resetting accounts between tests
update_device_chats() takes about 2 seconds on a modern device (Android) because the
welcome image file has to be written to the disk as a blob. The problem
was that this was done after the progress bar had vanished and before
anything else happened so that I thought that something had gone wrong
multiple times.
The UIs have to remove update_device_chats(), too..
Read all of an e-mail accounts messages and extract all To/CC addresses
if the From was from our own account.
Then, fetch existing messages from the server and show them.
Also, I fixed two other things:
- just by chance my test failed because of an completely unrelated bug.
The bug: bcc_self messages were not marked as read if mvbox_move was set
to true.
- add some color to the test output (minor change)
Sticky encryption rule, requiring that all replies to encrypted messages
are encrypted, applies only to messages with a quote now.
Co-Authored-By: B. Petersen <r10s@b44t.com>
Fix#1791 and show all group messages if the user already is in the group, even if the sender is blocked
Also fix a comment
Co-authored-by: link2xt <ilabdsf@gmail.com>
Since introduction of provider database, these certificate checks are
enabled for test servers anyway, but this setting prevents usage of
local servers with self-signed certificates.
