- do not attempt to mark reserved meessages as seen when
messages with empty Message-ID are marked as seen on IMAP
- do not reconnect on Seen flag synchronization failures This avoid
reconnection loops in case of permanent errors in `sync_seen_flags`
* Make set_config() look a bit nicer
* Add OnlyFetchMvbox option
* Add test for the config
* Add option to only watch mvbox
This is supposed to support having a server-side rule which moves
emails to the mvbox already. The new option makes sure the mvbox is
wathched and also makes sure no messages are feched from folders other
than the mvbox and the spam folder if enabled. It does not interact
with the other settings.
* Fixup ignore conditions
* Cleanup some bits
* Watch the mvbox when `WatchMvboxOnly` is set
* Rename back to only_fetch_mvbox (flub said it's OK for him)
* typo
* clippy, more typos
Co-authored-by: Hocuri <hocuri@gmx.de>
Synchronizing seen flags doubles the time required to scan all
folders. Delta Chat only marks messages as Seen on Inbox or DeltaChat,
so there is no need to check for Seen flag on other folders.
This operation takes roughly 0.3 s on a moderate size database.
Calling it once before scanning all folders and scanning
the watched folder instead of each time after downloading
a message from a folder speeds up IMAP loop.
Also resultified `get_watched_folders`.
Python test `test_moved_markseen` is modified to test using incoming
message instead of BCC-self message, because BCC-self message is
detected immediately in the Inbox.
`imap` table maps Message-IDs to UIDs on the server. `dc_receive_imf`
no longer gets the UID of the message as an argument and does not
insert the folder and UID of the message into the `msgs`
table. `server_folder` and `server_uid` columns in `msgs` table are
deprecated.
MoveMsg and DeleteMsgOnImap jobs are removed. Now messages are moved
and deleted only in the `fetch_move_delete` procedure that consults
the `target` column of the `imap` table to determine where the message
should go.
Where the message should go is determined after prefetching by the
`imap::target_folder()` procedure. Messages are only downloaded once
they reach their target folder to avoid race conditions in multidevice
setting, such as:
1. One device trying to FETCH the message while the other tries to
MOVE it.
2. One device marking the message as \Seen in the Inbox while the
other has already copied unseen message to the Movebox and is going to
delete the \Seen message in the Inbox.
3. Device downloads the message from the Inbox while there are newer
messages in the Movebox placed there by the other device, thus
processing the messages out of order.
* In dc_maybe_network_lost() directly set the connectivity "Not connected"
r10s reported that without doing this, the connectivity would stay at
"Connected" for 16 more seconds after network is gone and
dc_maybe_network_lost() was called.
* Set the state for all connections
fix#2539
It's always a bit ambiguous which function should do set_err or set last_send_error, I used this rule here:
If some code returns Status::RetryLater, then it sets last_send_error, because Status::RetryLater means that the user won't see the error directly on the message (if we returned Status::Failed(Err(_)), then the message would be shown as failed to the user) Also, smtp_send always sets last_send_error because, well, sending just failed or succeeded.
Also, remove unused field pending_error.
See https://support.delta.chat/t/discussion-how-to-show-error-states/1363/10 <!-- comment -->
It turns out that it's pretty easy to distinguish between lots of states (currently Error/NotConnected, Connecting…, Getting new messages… and Connected). What's not that easy is distinguishing between an actual error and no network, because if the server just doesn't respond, it could mean that we don't have network or that we are trying ipv6, but only ipv4 works.
**WRT debouncing:**
Sending of EVENT_CONNECTIVITY_CHANGED is not debounced, but emitted every time one of the 3 threads (Inbox, Mvbox and Sentbox) has a network error, starts fetching data, or is done fetching data.
This means that it is emitted:
- 9 times when dc_maybe_network() is called or we get network connection
- 12 times when we lose network connection
Some measurements: dc_get_connectivity() takes a little more than 1ms (in my measurements back in March), dc_get_connectivity_html() takes 10-20ms. This means that it's no immmediate problem to call them very often, might increase battery drain though. For the UI it may be a lot of work to update the title everytime; at least Android is smart enough to update the title only once.
Possible problems (we don't have to worry about them now I think):
- Due to the scan_folders feature, if the user has lots of folders, the state could be "Connecting..." for quite a long time, generally DC seemed a little unresponsive to me because it took so long for "Connecting..." to go away. Telegram has a state "Updating..." that sometimes comes after "Connecting...".
To be done in other PRs:
- Better handle the case that the password was changed on the server and authenticating fails, see https://github.com/deltachat/deltachat-core-rust/issues/1923 and https://github.com/deltachat/deltachat-core-rust/issues/1768
- maybe event debouncing (except for "Connected" connectivity events)
fix https://github.com/deltachat/deltachat-android/issues/1760
`Imap` structure is always created in a configured state now. There is
no default value for `ImapConfig` anymore.
Also resultify Scheduler::start() to fail on database errors, for
example if IMAP configuration cannot be read from the database during
`start_io()`. Previosuly errors during reading keys such as
`mvbox_watch` were simply ignored and folders were not watched until
the application is completely restarted, now start_io() will fail and
scheduler will only be started at the next start_io() call which
usually happens when app is brought to the foreground.
Switches from rusqlite to sqlx to have a fully async based interface
to sqlite.
Co-authored-by: B. Petersen <r10s@b44t.com>
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: link2xt <link2xt@testrun.org>
Start implementing #1994
TODO (in later PRs):
- Add a hint to the watch settings that all folders are fetched from time to time (to be done in the individual UIs)
- folder names are case-insensitive, so double-check that all comparisons are case-insensitive
- The `scan_folders.rs` file didn't get as large as I expected and it's probably not worth it having an extra file for it. But if there are no objections, I'll make another PR to rename it to `folders.rs` and also put into it `configure_folders()` from `imap/mod.rs` and `needs_move()` with all its tests from `message.rs`.
Done:
- Most mailboxes have a "Drafts" folder where constantly new emails appear but we don't actually want to show them, what do we do about this? The most reliable way to detect such messages that we found up to now is:
If there is no `Received` header AND it's not in the `ConfiguredSentbox`, then ignore the email.
- before or after INBOX idle trigger a new "scan all folders for messages". It does a "list folders" and then goes through all folders with select-statements, checking if "next-uid" was changed since checked last time. This might be batchable but in any case should not consume a lot of traffic. We might debounce this scan activity to happen at most every N minutes
- if next-uid changed for a folder, we "prefetch" and "fetch" DC-messages as as needed ("dc-messages" are not just those with "Chat-Version" headers, but can also be regular emails)
- if we discover DC-messages in folders that have the "/Spam" flag (maybe excluding ContactRequests) we automatically move them to INBOX/DeltaChat folder to help provider-spam-systems to regard this contact/mail as non-spam
- for now, we do not change any user visible option, but introduce this "scan all" automatically and on top of what exists. The DeltaChat folder-watching does not perform scan-all-folders (maybe with the exception to trigger scan-all also with DeltaChat if INBOX is not watched)
- Tests (except if you have ideas to improve them)
- all folders, their last uidvalidity, next-seen etc. are kept in a separate "imap-sync" sqlite table. Maybe this can be used to streamline some of the "Sent" folder and "DeltaChat" folder detection code we already have.
- We now also move self-sent messages from the Inbox to the Sent folder if `mvbox_move` is off, as this was very easy to do now. This way, we now behave more like a normal MUA if the user wants this.
FOR LATER PRs:
- maybe for the first 50 messages or so, we could reduce the IDLE-timeout (currently 23 minutes or so) to faster detect messages sent to non-inbox folders. However, on Android and iOS, we would likely trigger scan-all when the app moves to foreground, and so it might not be neccessary to reduce the current idle-timeout at least for them. We can leave this "faster discovery" question for the end, after we move to real-life testing.
- (Later on, after the above works, we can consider heuristics on which folders to perform IDLE on, and remove the Watch-folder options (inbox, deltachat, sent). We tried to find a safe scheme for already doing it but failed to fine one, too many unknowns, also some questions regarding multi-device (you might have different settings with each of it, one moves, the other doesn't etc.) so we postponed this in favor of the above incremental suggestion.)
* Start implementing #1994
* Add debug logs, it seems like the SQL migration can go into another pr
* Let fetch_new_messages return whether there are new emails
* Code style
* Don't prefetch if there are no new emails
* clippy
* Even more debug logs
* If the folder was not newly selected, return always try to fetch as
uid_next is probably outdated
* Fix new bug
* Recognize spam folder
* if we discover DC-messages in folders that have the "/Spam" flag (excluding ContactRequests) we automatically move them to INBOX/DeltaChat folder to help provider-spam-systems to regard this contact/mail as non-spam
* Clippy, prioritize folder_meaning over folder_name_meaning
* Add a first test, for the first day after installation only debounce to 2s
* Start adding two tests (both of them fail)
* Don't abort folder scan if one folder fails
* More consts
* Replace bool return value by enum
* Split test up into multiple tests
* Print logs during rust tests
* Rust tests pass now
* .
* One of the Python tests passes now - reconfigure folders during scanning
* Make the last test pass - Delete emails in all folders when starting the test, not only inbox and mvbox
The problem had been that emails were left in the folder "xyz"
* lint
* DB migration (untested)
* Store uid_next in SQL instead of lastseen in a config
* Revert "If Inbox-watch is disabled and enabled again, do not fetch emails from in between"
all folders are always watched, anyway
* clippy, rm debug logs, comments
* Codestyle, comments
* fixing things again
* Fix another test: don't fetch from uid_next-1 but uid_next; make some {} to {:#} so that we can use `.context(...)`
* move self-sent, non-setupmessage chat messages to the Sent folder if `mvbox_move` is off
* comment
* Comments, make sure things work even if there is no uid_next
* Style
* Comments
* The rust test tested wrongly
* comments, small codestyle change
* Ignore emails that are probably only drafts
Most mailboxes have a "Drafts" folder where constantly new emails appear
but we don't actually want to show them.
So: If there is no Received header AND it's not in the ConfiguredSentbox,
then ignore the email.
Also: Add test.
* Fix occasional test failure, it was introduced as DC now moves messages from Inbox to Sent
* Add `Received` header to the rust tests
* After this PR we will always watch all folders and delete messages there if server_delete is enabled. So, for people who have server_delete on, disable it and add a hint to the devicechat
* comment, small fix
* link2xt's first review
* Use ON CONFLICT(FOLDER) DO to update and if it doesn't exist, then insert
Reason from link2xt: We had a problem with multiple peerstates inserted due to key fingerprint parsing error previously. With logic in Rust a similar problem can occur: an UPDATE can fail for reasons other than a conflict. PRIMARY KEY should ensure uniqueness in this case, but anyway.
* Remove two TODO statements, remove fetch_new_messages: ignoring uid {}, uid_next was {} log
* Next TODO: Make uidvalidity and uid_next DEFAULT 0
* rm two TODOs, Seems like we are not going to `exclude folders that are watched anyway` in this PR
* small tweak: Handle instants more carefully
* Add scan_all_folders_debounce_secs config for tests, set debounce to 60s (before it was just 2s during the first day)
* Don't use bold letters for the device message
* React to changes in the folders better
Before, if there was a configured Sent folder, but then it got
removed and replaced with another folder with a name meaning "Sent" but
without Sent flag, it would be ignored.
So, instead of checking against ConfiguredSentboxFolder,
create two Option variables at the beginning of the loop and replace
them with Some if it is None. At the end of the loop, store the new
values into ConfiguredSendboxFolder and ConfiguredSpamFolder, even if it
is None.
Also, derive some useful traits.
* move job: Return a meaningful error if server_folder is None instead of panicing
* small error-handling fix
* Fix test_fetch_existing() python test
Before, we sometimes got a race condition where scan_folders() sees that
there is a Sentbox and saves this info after we set the
ConfiguredSentbox to None and before the message is sent.
So, just expect that the message is moved to the sentbox.
* migration is 72 now
* rm 2 TODOs, Don't infinitely retry when dc_receive_imf() returns Err
* clippy: Remove glob imports
* Delete created folders at the beginning of tests
(some created folders made problems in the next tests because)
* Improve resetting accounts between tests
